LEIT 12 vs LEIT 11: Which Bulb Fits Your Space?

Quick answer

There is no LEIT 12 or LEIT 11 bulb in the HUMANHOME catalog, so a direct LEIT 12 vs LEIT 11 comparison is not possible. If you are shopping for a LEIT sconce, the real decision is between the E26 5.0W LED Bulb and the G8 6.0W LED Bulb. Choose based on your fixture's socket and your home's voltage, not on a model number that does not exist.

If you searched for LEIT 12 vs LEIT 11, you likely saw those names somewhere and assumed they were two bulb options for the LEIT sconce collection. They are not part of the HUMANHOME catalog. The LEIT collection is a family of sconces, and the bulbs that fit them are the E26 5.0W LED Bulb and the G8 6.0W LED Bulb, both from Emery Allen.

That makes this comparison simpler and more useful than a spec sheet duel. Instead of comparing two phantom bulbs, we will compare the two real bulbs that fit LEIT fixtures, explain the trade-offs between them, and help you decide which one belongs in your space.

Why LEIT 12 and LEIT 11 do not exist as bulbs

The LEIT name refers to a sconce collection, not a bulb line. The LEIT 01, LEIT 02, and LEIT 04 are wall sconces built around stepped geometry, layered planes, and horizontal seams. They are fixtures, and like most fixtures they need a replaceable bulb rather than shipping with a permanently integrated LED.

That is a meaningful distinction. A fixture with an integrated LED is replaced entirely when the light source fails. A fixture that takes a standard replacement bulb lets you swap the bulb when it dims or dies, which extends the useful life of the sconce itself. So the question is not which LEIT bulb is brighter, but which of the two compatible Emery Allen bulbs matches your socket and voltage.

• Check the socket label on your fixture or the product page before buying a bulb.
• If you already own a LEIT sconce, the socket type is the fastest way to narrow your choice.

E26 5.0W vs G8 6.0W: the real comparison

The E26 5.0W LED Bulb uses an E26 base, the standard screw-in base found on countless lamps and fixtures. It draws 5.0W, carries a 90+ CRI rating, and is dimmable. It is available in 120V and 220V–240V versions. If your LEIT sconce takes a screw-in bulb, this is the one to consider.

The G8 6.0W LED Bulb uses a G8 base, a pin-type base common in smaller, more compact fixtures. It draws 6.0W, also carries 90+ CRI, is dimmable, and comes in 120V and 220V–240V options. The 1.0W difference between the two is small, and neither catalog listing states lumen output, so do not assume the 6.0W bulb is meaningfully brighter. The base type is the deciding factor.

• Never force a pin-base bulb into a screw socket or vice versa; the base types are not interchangeable.
• Match the voltage option to your home's electrical supply before ordering.

What 90+ CRI and dimming mean in practice

Both bulbs share a 90+ CRI rating, which measures how faithfully a light source renders colors compared with natural light. In a hallway, bedroom, or living space, a higher CRI helps skin tones, wood finishes, and textiles look correct rather than washed out or slightly green. For a sconce used as accent or ambient light, that matters more than a small wattage difference.

Both bulbs are also dimmable, so you can pair them with a compatible dimmer to shift the mood of a room. Dimming performance depends on the dimmer and wiring, not on the bulb alone, so if smooth low-end dimming matters to you, confirm your dimmer is compatible with LED loads. The catalog does not list beam angle or color temperature, so treat those as open questions to resolve before purchase if they are critical to your design.

• Use a dimmer rated for LED loads to avoid flicker or buzzing.
• If color temperature is critical, confirm it before ordering since it is not listed in the catalog facts.

Pairing bulbs with LEIT and PALIA fixtures

The LEIT 01, LEIT 02, and LEIT 04 sconces share a stepped, architectural look built from layered planes and horizontal seams. Because the collection is about proportion and rhythm rather than ornament, the bulb should disappear into the design. A dimmable, high-CRI bulb supports that goal by keeping the light clean and consistent across multiple fixtures.

If you are also lighting with the PALIA 05 ceiling mount, which uses scalloped geometry and contour, the same logic applies: the fixture is the statement, the bulb is the support. Using the same bulb family across LEIT and PALIA fixtures helps keep color rendering consistent from ceiling to wall, which is especially noticeable in open-plan rooms.

• Buy the same bulb for every fixture in a sightline to avoid visible color shifts.
• Keep one spare bulb on hand so a failed lamp never leaves a fixture dark.

Trade-offs to weigh before you buy

• Base type: E26 is a screw base; G8 is a pin base. They are not interchangeable, and the wrong one will not fit your fixture. Confirm your socket first; this single check eliminates half the options.
• Wattage difference: 5.0W versus 6.0W is a small gap, and neither listing states lumen output, so brightness claims are not supported by the catalog. Choose by base and voltage, not by the wattage number.
• Voltage options: Both bulbs come in 120V and 220V–240V, which covers North American and many international supplies. Match the voltage to your home before ordering to avoid a non-returnable mistake.
• Shared strengths: Both bulbs offer 90+ CRI and dimming, so color quality and dimmability are not differentiators here. If you want high CRI and dimming, either bulb delivers it.

Product facts that matter

• E26 5.0W LED Bulb: Emery Allen replacement bulb for HUMANHOME fixtures with a 5.0W draw, 90+ CRI, dimmable, available in 120V and 220V–240V. The E26 screw base fits standard sockets, and the dual voltage options let you match the bulb to your home's electrical supply.
• G8 6.0W LED Bulb: Emery Allen replacement bulb for HUMANHOME fixtures with a 6.0W draw, 90+ CRI, dimmable, available in 120V and 220V–240V. The G8 pin base suits compact fixtures where a screw base will not fit; the slightly higher wattage is not a reliable brightness indicator on its own.
• LEIT 02: Part of the Leit Collection, which explores stepped geometry through layered planes and horizontal seams. The design rewards a clean, high-CRI bulb that lets the fixture's geometry read clearly rather than competing with it.
• PALIA 05: Part of the Palia Collection, which uses scalloped geometry and contour to define surface and edge. Matching bulbs across LEIT and PALIA fixtures keeps color rendering consistent in rooms where both are visible.

Which bulb fits your space

Best for

• Fixtures with a standard E26 screw socket, including many lamps and sconces
• Anyone who wants a dimmable, 90+ CRI bulb with a choice of 120V or 220V–240V

Not for

• Compact fixtures that require a G8 pin base, which the E26 cannot fit
• Buyers who need a specific color temperature or lumen output, since neither is listed in the catalog facts

LEIT 12 and LEIT 11 are not real bulb options, so the useful comparison is between the E26 5.0W LED Bulb and the G8 6.0W LED Bulb. Check your socket and voltage, then choose the one that fits. Both deliver 90+ CRI and dimming, so either is a solid match for a LEIT sconce.